I recently purchased this logic analyzer.  It’s a clone of the Saleae logic analyzer.  Available for 50$ here with 10 mini grabbers.  It appears to perform exactly like the Saleae except its noticeably larger.  It even uses Saleae’s software.  It does ship from over seas, and might take a little while but it did arrive, and had free shipping.

The cable that ships with it doesn’t have wires broken out for the power supply pins, but it appears there are 2 extra pins, 3.3v and 5v power sources.  I’ll have to see about adding 2 more pins to the connector to utilize them.  The factory cable has 8 logic wires, and 2 grounds, but the connector has lots of extra spots for wires, extra grounds and those power supply pins.

Anyway, you can’t beat the price.  Oh it’s also supported by Sigrok, an open source logic analyzer that is multi platform.

One of the main reasons for me starting this club is to create a space for all my tools. Here are my two newest tools which will hapily be loaned to the organization once we get one going. These were aquired with the intention of using them to build a RepRap (www.reprap.org) from Birch plywood.

I plan to use transfer paper to print out the shapes at their full size. Then I will cut the shapes as close as I can with the scroll saw and finish them up with the drill press??? Yes, I said drill press. That’s because I purchased a Drum Sanding adapter that turns the drill press into a drum sander. I’ll of course use the drill press to drill the required holes as well.

Mini Drill Press

Scroll Saw

As you can see this is not your typical scroll saw and drill press. They are miniturized to some extent. The scroll saw is only 16″ long and the drill press is roughly 18″ tall when fully assembled. The price also matches the small size. The scroll saw was aproximately $70 from my local harborfreight and the drill press was $80 ordered online.

I will feature more tools under the Tool Shed category in the near future.